Phone 61
Incoming calls
When you receive a call, the R380s rings. The “Incoming call:” view
displays who is calling and asks you if you want to “
Answer?
”
.
To answer the call:
•
Tap
Yes
to answer the call. When the call is finished, tap .
To reject the call:
•
Tap
No
. The call is rejected and a busy tone is sent to the caller.
To ignore the call:
•
Select
Ignore
. The call notification continues and the telephone
button appears in the toolbar until the call is timed-out.
Note: A data call cannot be answered as a voice call. Data
information must be downloaded to a data compatible machine or
service. The “Incoming call:” view reflects this and displays data in
the message and asks you if you want to send a busy tone. Fax is not
supported and cannot be answered.
Muting the microphone
To temporarily disconnect the microphone during a call:
•
Tap and hold to mute the microphone. When released the
microphone is re-connected.
To disconnect the microphone during a call:
•
Tap and
select
Mute microphone
. appears in the display.
To re-connect the microphone during a call:
•
Tap and
select
Turn off mute
to resume the conversation.
On hold
On hold allows you to put a call that is in progress on hold.
To put a call on hold:
•
Tap the number of the call that is in progress and select
Hold call
from the pop-up menu. Alternatively, you can tap to put the
active call on hold. The On hold icon appears in the display.
To resume a call:
•
Tap the number of the call that is on hold and select
Retrieve
from
the pop-up menu. Alternatively, you can tap to retrieve the
held call.
Note: If you tap to end an active call when there is a call on
hold a ‘Call on hold’ message appears asking ‘Retrieve held call?’. If
you do not select
Yes
or
No
within five seconds the call is
automatically ended.
To Next Page
Loading...
