Ericsson R380s - Page 74

74 Phone
Divert calls
Divert calls allows you to change the settings of your conditional and
all call diverts. The all calls settings allow you to specify a single
telephone number for each of the voice, data and fax calls you
receive. The conditional settings (voice only) will let you specify a
number to divert calls to:
•
if you are already on the phone,
When busy:
.
•
if you do not answer within a specified time (operator dependent),
No reply:
.
•
if your R380s is turned off or if you are unreachable,
Not reachable:
.
To access the call divert settings:
1.
Scroll and tap
Divert calls
in the Telephony – Settings directory.
The directory expands providing you with access to the following
settings:
•
All calls.
•
Conditional.
To change the all calls voice/data/fax settings:
1.
Tap
All calls
in the Telephony – Settings directory. The directory
expands.
2.
Tap
Voice
,
Data
or
Fax
in the directory. The All calls (Voice, Data or
Fax) view appears in the display.
3.
To change or enter a phone number that voice, data or fax calls are
to be diverted to, select
Divert to:
and enter a number.
4.
To turn the voice, data or fax call divert on or off, select the
Active
and select
On
or
Off
.
5.
To refresh using the current network settings, tap and select
Check divert status
.
6.
Tap to implement and save the new settings. The display
returns to the current expanded directory in the Telephony –
Settings view.
To change the conditional speech settings:
1.
Tap
Conditional
in the Telephony – Settings directory. The
directory expands.
2.
Tap
Voice
in the directory. The Conditional call divert (voice) view
appears in the display.
3.
To change or enter a phone number that calls are to be diverted to
when busy, select
When busy:
and enter a number.
4.
To change or enter a phone number that calls are to be diverted to
when there is no reply, select
No reply:
and enter a number.
OK