Ericsson R380s - Page 75

Phone 75
5.
To change or enter a phone number that calls are to be diverted to
when you are unreachable, select
Not reachable:
and enter a
number.
6.
To turn the divert calls on or off for any of the above conditions,
select the
Active:
relevant to the diversion criteria specified in steps
3 to 5 and select
On
or
Off
.
7.
To refresh using the current network settings, tap and select
Check divert status
.
8.
Tap to implement and save the new settings. The display
returns to the current expanded directory in the Telephony –
Settings view.
Note: Divert calls is a network setting that requires access to your
network.
Networks
Networks allows you to search and select a network and to edit your
preferred list of networks.
To access the networks settings:
1.
Scroll and tap
Networks
in the Telephony – Settings directory. The
directory expands providing you with access to the following
settings:
•
Select network.
•
Search mode.
•
Edit preferred list.
To select a network:
1.
Tap
Select network
in the Telephony – Settings directory. A
message appears in the display asking you to wait while your
R380s performs a network search. You can stop the search and
return to the Telephony – Settings directory by tapping
Stop
.
Otherwise, when the search is complete a Select network view
appears in the display showing all available networks and their
associated status:
•
Current
– The currently registered network (highlighted).
•
Home
– The home network.
•
Preferred
– A network on the preferred list.
•
Available
– A network which is not the current, home or
preferred network, and not forbidden.
•
Forbidden
– A network which is not allowed.
OK