ERLO TC.25 - User Manual

Para la instalación, manejo y mantenimiento de la máquina es necesario leer
minuciosamente las instrucciones
It is absolutely necessary to read carefully the following instructions for the installation handling and
maintenance of the machine
Vor Inbetriebnahme ist es unbedingt erforderlich, die nachstehenden Bedienungsanleitungen
eingehend zu studieren
Il est absolutement necessaire de lire avec attention les instructions données pour l’installation,
manoeuvre et entretien de la machine
Modelo/Model/Modell/Modèle
Nº de la máquina/Machine number/Maschinen-Nr/Nº de la machine
Potencia motor/Machine power/Motorleistung/Puissance moteur
Voltaje/Voltage/Spannung/Voltage
Fecha de verificación/Verification date/Abnahmedatum/Date de verification
CLIENTE/CUSTOMER/KUNDE/CLIENT
NOTA IMPORTANTE/ IMPORTANT NOTE/ WITCHIGE HINWEISE/ AVIS IMPORTANT
Para piezas de recambio es necesario señalar:/ It is necessary to state for spare parts:
Für die entsprechenden Ersatzteile muss folgendes angegeben werden:/ Pour pièces de
rechange il est necessaire de mentioner:
- Modelo de máquina/ Machine model/ Maschinenmodell/ Modèle de machine
- Nº de máquina/ Machine number/ Machinen-Nr./ Numéro de machine
- Nº de pieza/ Piece reference/ Ersatzteil-Nr./ Reference de la pièce
CONSTRUCCIONES MECANICAS ERLO, S.A. - P.O. BOX 19 - 20720 AZKOITIA (SPAIN)
Tel. (34) /943.851858 - Fax: (34) 943.85 71 28 E-mail: erlo@erlo.com

Summary

Machine Handling and Transport

Safe Machine Handling and Lifting

Procedures for lifting and transporting the machine using cranes and auxiliary equipment.

Machine Start-up and Installation

Installation Site Requirements

Guidelines for site selection, foundation, and environmental conditions for machine installation.

Electrical and Utility Setup

Proper electrical connections, voltage checks, and utility requirements for startup.

Operation and Adjustment

Tool Setting and Ejection

Procedures for inserting, adjusting, and automatically ejecting tools.

Table Adjustments

How to adjust table height, inclination, and rotation.

Speed and Feed Settings

Changing spindle speeds and selecting automatic or manual feed rates.

Depth Control and Feed Engagement

Adjusting drilling depth and engaging/disengaging feed mechanisms.

Safety Controls and Limiters

Using pair limiter, shank locking, and understanding safety indicators.

Maintenance and Troubleshooting

Common Failures and Repair

Identification and resolution of common machine problems and repair procedures.

Routine Maintenance

Performing lubrication and scheduled maintenance for optimal machine performance.

ERLO TC.25 Specifications

General

Drilling capacity in steel	25 mm
Tapping capacity in steel	M20
Chuck capacity	1 - 16 mm
Frequency	50 Hz
Motor power	1.5 / 2.2 kW