ERLO TCA.35 - User Manual

Para la instalación, manejo y mantenimiento de la máquina es necesario leer
minuciosamente las instrucciones
It is absolutely necessary to read carefully the following instructions for the installation handling and
maintenance of the machine
Vor Inbetriebnahme ist es unbedingt erforderlich, die nachstehenden Bedienungsanleitungen
eingehend zu studieren
Il est absolutement necessaire de lire avec attention les instructions données pour l’installation,
manoeuvre et entretien de la machine
Modelo/Model/Modell/Modèle
Nº de la máquina/Machine number/Maschinen-Nr/Nº de la machine
Potencia motor/Machine power/Motorleistung/Puissance moteur
Voltaje/Voltage/Spannung/Voltage
Fecha de verificación/Verification date/Abnahmedatum/Date de verification
CLIENTE/CUSTOMER/KUNDE/CLIENT
NOTA IMPORTANTE/ IMPORTANT NOTE/ WITCHIGE HINWEISE/ AVIS IMPORTANT
Para piezas de recambio es necesario señalar:/ It is necessary to state for spare parts:
Für die entsprechenden Ersatzteile muss folgendes angegeben werden:/ Pour pièces de
rechange il est necessaire de mentioner:
- Modelo de máquina/ Machine model/ Maschinenmodell/ Modèle de machine
- Nº de máquina/ Machine number/ Machinen-Nr./ Numéro de machine
- Nº de pieza/ Piece reference/ Ersatzteil-Nr./ Reference de la pièce
CONSTRUCCIONES MECANICAS ERLO, S.A. - P.O. BOX 19 - 20720 AZKOITIA (SPAIN)
Tel. (34) /943.851858 - Fax: (34) 943.85 71 28 E-mail: erlo@erlo.com

Summary

Machine Handling and Transport

Machine Start-up

Operation and Adjustment

Tool Setting

Procedure for installing tools into the spindle taper securely.

Table Height Adjustment and Support Unit Turning

Adjusting the table height and rotating the support assembly.

Table Rotating Arm Inclination Adjustment

Adjusting the tilt angle of the table's rotating arm.

Table Turning Adjustment

Adjusting the rotation of the table.

Speeds Change

Procedure for changing the machine's operating speeds.

Drilling Depth

Setting the desired depth for drilling operations.

Automatic Feed (Mechanical Clutch)

Engaging and disengaging automatic feed using mechanical clutch.

Automatic Feed (Electromagnetic Clutch)

Engaging and disengaging automatic feed using electromagnetic clutch.

Fine Sensitive Manual Feed

Operating the machine with fine manual feed control.

Torque Limiter

Adjusting or understanding the torque limiting mechanism.

Automatic Tool Ejector

Operation of the automatic tool ejection system.

Shank Locking

Securing the spindle shank during operations.

Common Failures

Maintenance

Operations Causing Risk

Drilling Risks

Identifying and mitigating risks associated with drilling operations.

Coolant Tank

ERLO TCA.35 Specifications

General

Drilling capacity in steel	35 mm
Drilling capacity in cast iron	40 mm
Tapping capacity in steel	M24
Spindle speeds	8
Motor power	2.2 kW
Spindle taper	MT 4
Power	3.0 kW