ERLO TCA.45 - User Manual

Para la instalación, manejo y mantenimiento de la máquina es necesario leer
minuciosamente las instrucciones
It is absolutely necessary to read carefully the following instructions for the installation handling and
maintenance of the machine
Vor Inbetriebnahme ist es unbedingt erforderlich, die nachstehenden Bedienungsanleitungen
eingehend zu studieren
Il est absolutement necessaire de lire avec attention les instructions données pour l’installation,
manoeuvre et entretien de la machine
Modelo/Model/Modell/Modèle
Nº de la máquina/Machine number/Maschinen-Nr/Nº de la machine
Potencia motor/Machine power/Motorleistung/Puissance moteur
Voltaje/Voltage/Spannung/Voltage
Fecha de verificación/Verification date/Abnahmedatum/Date de verification
CLIENTE/CUSTOMER/KUNDE/CLIENT
NOTA IMPORTANTE/ IMPORTANT NOTE/ WITCHIGE HINWEISE/ AVIS IMPORTANT
Para piezas de recambio es necesario señalar:/ It is necessary to state for spare parts:
Für die entsprechenden Ersatzteile muss folgendes angegeben werden:/ Pour pièces de
rechange il est necessaire de mentioner:
- Modelo de máquina/ Machine model/ Maschinenmodell/ Modèle de machine
- Nº de máquina/ Machine number/ Machinen-Nr./ Numéro de machine
- Nº de pieza/ Piece reference/ Ersatzteil-Nr./ Reference de la pièce
CONSTRUCCIONES MECANICAS ERLO, S.A. - P.O. BOX 19 - 20720 AZKOITIA (SPAIN)
Tel. (34) /943.851858 - Fax: (34) 943.85 71 28 E-mail: erlo@erlo.com

Summary

Machine Handling and Transport

Machine Start-up

Operation and Adjustment

Tool Setting

Procedure for inserting tools into the spindle taper.

Table Height Adjustment and Support Unit Turning

Adjusting table height and support unit rotation.

Table Rotating Arm Inclination Adjustment

Adjusting the inclination of the table's rotating arm.

Table Turning Adjustment

Adjusting the table's rotation.

Speeds Change

How to change machine speeds using control levers.

Drilling Depth

Setting the desired drilling depth using the index.

Automatic Feed (Mechanical Clutch)

Engaging and disengaging automatic feed with mechanical clutch.

Automatic Feed (Electromagnetic Clutch)

Engaging and disengaging automatic feed with EMEL clutch.

Fine Sensitive Manual Feed

Using manual rotation for precise feed control.

Pair Limiter

Adjusting the torque limiter to prevent mechanism damage.

Automatic Tool Ejector

Operating the automatic tool ejection mechanism.

Shank Locking

Securing the tool shank, recommended for milling.

Maintenance

Operations that can cause some kind of risk

Drilling Safety

Safety precautions during drilling operations.

Coolant Tank

Manipulation Way

ERLO TCA.45 Specifications

General

Brand	ERLO
Model	TCA.45
Category	Drill
Language	English