ERLO TCA 50 User Manual

Para la instalación, manejo y mantenimiento de la máquina es necesario leer
minuciosamente las instrucciones
It is absolutely necessary to read carefully the following instructions for the installation handling and
maintenance of the machine
Vor Inbetriebnahme ist es unbedingt erforderlich, die nachstehenden Bedienungsanleitungen
eingehend zu studieren
Il est absolutement necessaire de lire avec attention les instructions données pour l’installation,
manoeuvre et entretien de la machine
Modelo/Model/Modell/Modèle
Nº de la máquina/Machine number/Maschinen-Nr/Nº de la machine
Potencia motor/Machine power/Motorleistung/Puissance moteur
Voltaje/Voltage/Spannung/Voltage
Fecha de verificación/Verification date/Abnahmedatum/Date de verification
CLIENTE/CUSTOMER/KUNDE/CLIENT
NOTA IMPORTANTE/ IMPORTANT NOTE/ WITCHIGE HINWEISE/ AVIS IMPORTANT
Para piezas de recambio es necesario señalar:/ It is necessary to state for spare parts:
Für die entsprechenden Ersatzteile muss folgendes angegeben werden:/ Pour pièces de
rechange il est necessaire de mentioner:
- Modelo de máquina/ Machine model/ Maschinenmodell/ Modèle de machine
- Nº de máquina/ Machine number/ Machinen-Nr./ Numéro de machine
- Nº de pieza/ Piece reference/ Ersatzteil-Nr./ Reference de la pièce
CONSTRUCCIONES MECANICAS ERLO, S.A. - P.O. BOX 19 - 20720 AZKOITIA (SPAIN)
Tel. (34) /943.851858 - Fax: (34) 943.85 71 28 E-mail: erlo@erlo.com

ERLO TCA 50 Specifications

General

Brand	ERLO
Model	TCA 50
Category	Drill
Language	English

Summary

Machine Handling and Transport

Manipulation Methods Guide

Visual guide to different methods for manipulating the machine.

Machine Start-up and Installation

Operation and Adjustment

Tool Installation

Instructions for fitting and securing tools into the machine spindle.

Table Height and Support Rotation Adjustment

Adjusting the table height and rotating the support assembly.

Table Arm Inclination Adjustment

Adjusting the tilt angle of the table's rotating arm.

Table Rotation Adjustment

Adjusting the rotation of the table.

Speed Change Procedure

How to change the machine's operating speeds safely.

Drilling Depth Setting

Setting the desired drilling depth.

Automatic Feed (Mechanical Clutch)

Engaging and disengaging the automatic feed using a mechanical clutch.

Automatic Feed (Electromagnetic Clutch)

Engaging and disengaging the automatic feed using an electromagnetic clutch.

Fine Sensitive Manual Feed

Using fine manual feed for precise control.

Torque Limiter Adjustment

Information about the torque limiter for overload protection.

Automatic Tool Ejector Operation

How to use and ensure the automatic tool ejector is in the correct position.

Shank Locking Procedure

Instructions for locking the shank, recommended for milling.

Key Maintenance and Repair Operations

Common Faults and Troubleshooting

Broken Return Spring Repair

Troubleshooting and fixing a broken return spring.

General Maintenance Information

Operations with Risk Potential

Drilling Safety Precautions

Safety precautions specific to drilling operations.

Maintenance Safety Precautions

Safety measures for repair and maintenance work.

Coolant Tank Capacity

Information about the coolant tank capacity.

Greasing Instructions

Weekly Greasing Points (Oil)

Weekly greasing points for oil lubrication.

48-Hour Greasing Points

Greasing points requiring lubrication every 48 hours.

Weekly Greasing Points (Grease, Hand)

Weekly greasing points for grease lubrication by hand.

Weekly Greasing Points (Oil, Hand w/Support)

Weekly oil greasing points by hand with support movement.

Gearbox Lubrication and Annual Oil Change

Gearbox lubrication and annual oil change procedures.

Lubrication Capacity Specifications

Table showing lubrication capacities for different machine parts.

Machine Description

Speed and Feed Controls

Components for selecting machine speeds and feed rates.

Depth and Table Adjustments

Components for adjusting drilling depth and table positioning.

Manual Feed Operation

Controls for operating the machine's manual feed system.

Models and Specifications