6 CONTROL PANEL
0463 479 001
- 32 -
© ESAB AB 2017
MIG Gun Spot time on adjustment
Parameters Flux cored
Parameters Manual MIG
Percent Settings
Preflow The time the
shielding gas stays on
before the welding arc is
started
Smart MIG
Postflow The time the
shielding gas stays on after
the welding arc is stopped
Cancel
Seconds
Saving welding programs for
a specific application when in
the Memory Mode
Settings on user manual
menu
Burnback Adjusting the time
when the voltage stays on
after the wire feed is stopped
to keep the wire from freezing
in the weld puddle
Spool Gun Stick
2T, Trigger On/OFF Lift-TIG
4T, Trigger Hold/Lock User Manual on main menu
Amps
Plate thickness at sMIG
mode
To Next Page