2 INTRODUCTION
0463 815 101 - 12 - © ESAB AB 2021
2 INTRODUCTION
The ESAB EMP 210 is a self-contained single phase multi process welding system that is
capable of performing MIG (GMAW/FCAW), MMA (SMAW) and LIFT TIG (L-GTAW) welding.
The ESAB EM 210 is a self-contained single phase welding system that is capable of performing
MIG (GMAW/FCAW) welding.
The power sources are equipped with an integrated wire feed unit, digital voltage and amperage
meters, and a host of other features.
2.1 Equipment
ESAB EMP 210 is supplied with:
• EMP 210 power source with 6 ft (1.8 m) gas hose fitted, NEMA 6-50P, the style of MIG
Gun connector is TWECO connector
• Ground clamp with #6 AWG (16 mm
2
)
lead and 50mm OKC cable connector, 9 ft (3m) long
• Electrode holder with #6 AWG (16 mm
2
)
lead and 50mm OKC cable connector, 9 ft (3m) long
• Flowmeter regulator (0781-9411B)
• Instruction manual
• NEMA 6-50R to N5-15P power adapter
• 2 lb, Ø0.03 in. (1 kg, Ø0.8 mm) solid wire (1A5008201M)
• 0.024V / 0.030V feed roll fitted (7977036)
• 0.030K / 0.035K feed roll spare (7977731)
ESAB EM 210 is supplied with:
• EM 210 power source, 6 ft (1.8 m) gas hose, NEMA 6-50P, the style of MIG Gun
connector is TWECO connector
• Ground clamp with #6 AWG (16 mm
2
) lead and 50mm OKC cable connector, 9 ft (3m) long
• Flowmeter regulator (0781-9411B)
• Instruction manual
• NEMA 6-50R to N5-15P power adaptor
• 2 lb, Ø0.03 in. (1 kg, Ø0.8 mm) solid wire (1A5008201M)
• 0.024 V / 0.030 V feed roll fitted (7977036)
• 0.030 K / 0.035 K feed roll spare (7977731)
To Next Page
Loading...
