ESAB EMP 210 - Ordering Spare Parts

9 ORDERING SPARE PARTS
0463 815 101 - 78 - © ESAB AB 2021
9 ORDERING SPARE PARTS
ESAB EMP 210 and ESAB EM 210 are designed and tested in accordance with the Canadian
standards CAN/CSA-E60974-1. On completion of service or repair work, it is the responsibility of
the person(s) performing the work to ensure that the product still complies with the requirements
of the above standards.
Spare parts and wear parts can be ordered through your nearest ESAB dealer, see esab.com.
When ordering, please state product type, serial number, designation and spare part number in
accordance with the spare parts list. This facilitates dispatch and ensures correct delivery
CAUTION!
Repair and electrical work should be performed by an authorised ESAB service
technician.
Use only ESAB original spare and wear parts.