ESAB ES 150i PRO - Introduction; Equipment

2 INTRODUCTION
0463 715 001
- 8 -
© ESAB AB 2021
2 INTRODUCTION
Overview
ES 150i PRO, ES 200i PRO is an inverter-based power source intended for MMA (Manual
Metal Arc) and TIG (Tungsten Inert Gas) welding.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1 Equipment
ES 150i PRO, ES 200i PRO includes:
• Power Source
• Work Clamp Leadset
• Electrode Holder Leadset
• Operation Manual
• Shoulder Strap
• Carry Case