2
These INSTRUCTIONS are for experienced operators. If you are not fully familiar with
the principles of operation and safe practices for arc welding and cutting equipment, we
urge you to read our booklet, "Precautions and Safe Practices for Arc Welding, Cutting, and
Gouging," Form 52-529. Do NOT permit untrained persons to install, operate, or maintain
this equipment. Do NOT attempt to install or operate this equipment until you have read and
fully understand these instructions. If you do not fully understand these instructions, con-
tact your supplier for further information. Be sure to read the Safety Precautions before
installing or operating this equipment.
BE SURE THIS INFORMATION REACHES THE OPERATOR.
YOU CAN GET EXTRA COPIES THROUGH YOUR SUPPLIER.
USER RESPONSIBILITY
This equipment will perform in conformity with the description thereof contained in
this manual and accompanying labels and/or inserts when installed, operated, main-
tained and repaired in accordance with the instructions provided. This equipment must
be checked periodically. Malfunctioning or poorly maintained equipment should not be
used. Parts that are broken, missing, worn, distorted or contaminated should be re-
placed immediately. Should such repair or replacement become necessary, the manu-
facturer recommends that a telephone or written request for service advice be made to
the Authorized Distributor from whom it was purchased.
This equipment or any of its parts should not be altered without the prior written
approval of the manufacturer. The user of this equipment shall have the sole responsi-
bility for any malfunction which results from improper use, faulty maintenance, damage,
improper repair or alteration by anyone other than the manufacturer or a service facility
designated by the manufacturer.
To Next Page
Loading...
