ESAB Robust Feed PRO User Manual

3 TECHNICAL DATA
0463 691 001
- 14 -
© ESAB AB 2019
RobustFeedPRO, valid from serial no. 904-xxx-xxxx
60% duty cycle 500 A
100% duty cycle 400 A
Enclosureclass IP44
*) Maximum speed is guaranteed across the whole speed range for all wires. For 2.0-mm
solid wires and 2.4-mm cored wires, speed is guaranteed within the speed range of
0.8–8.0m/min (32–315in./min). The RobustFeedPRO will be able to achieve higher
feeding speed above 8.0m/min (315in./min), but with higher tolerances.
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment with the IP44 marking is intended for indoor and outdoor use and can withstand
rain from all directions.

ESAB Robust Feed PRO Specifications

General

Brand	ESAB
Model	Robust Feed PRO
Category	Wire Feeders
Language	English