ESAB Robust Feed PRO User Manual

3 TECHNICAL DATA
0463 691 001
- 13 -
© ESAB AB 2019
3 TECHNICAL DATA
RobustFeedPRO, valid from serial no. 904-xxx-xxxx
Power Supply voltage 42 V AC, 50–60 Hz
Power requirement 181 VA
Rated supply current I
1
4.3 A
Settings data:
Wire feed speed
0.8–25.0 m/min (32–984 in./min) *
)
Creep start OFF or ON
2/4-stroke 2-stroke or 4-stroke
Wire selection Solid or Cored
Crater fill From 0s (OFF) to 5s
Torch connection EURO, Tweco #4, Tweco #5
Max. diameter wire bobbin 12 in (300 mm)
Wire dimension:
Fe 0.6–2.0 mm (0.023–5/64 in.)
Ss 0.6-1.6 mm (0.023-1/16 in.)
Al 1.0-1.6 mm (0.040-1/16 in.)
Cored wire 0.9-2.4 mm (0.035-3/32 in.)
Weight:
RobustFeedPRO 37.1 lb (16.9 kg)
RobustFeedPRO, Water 37.8 lb (17.2 kg)
RobustFeedPROOffshore 38.1 lb (17.3 kg)
RobustFeedPROOffshore, Water 38.7 lb (17.6 kg)
RobustFeedPRO,Tweco 37.1 lb (16.9 kg)
RobustFeedPROOffshore,Tweco 38.1 lb (17.3 kg)
Maximum weight wire spool 18.5 kg (40.8 lbs)
Dimensions (L×W×H) RobustFeedPRO 26.6×10.4×16.5in (675×265×418mm)
Operating temperature -20° to +55°C (-4 to +131°F)
Transport and storage temperature -40° to +80°C (-40° to +176°F)
Shielding gas All types intended for MIG/MAG welding
Maximum gas pressure 5 bar (0.5 MPa)
Coolant(for "RobustFeedPRO,Water" and
"RobustFeedPROOffshore,Water")
ESAB's ready mixed coolant
Maximum coolant pressure 5 bar (0.5 MPa)
Permissible load at +40°C:
50% duty cycle 550 A
60% duty cycle 500 A
100% duty cycle 400 A
Permissible load at +55°C:
50% duty cycle 550 A

ESAB Robust Feed PRO Specifications

General

Brand	ESAB
Model	Robust Feed PRO
Category	Wire Feeders
Language	English