CUTMASTER 40
0-5557 PARTS LIST
47
SECTION 6: PARTS LISTS
6.01 Introduction
A. Parts List Breakdown
The parts list provides a breakdown of all replaceable components. The parts lists are arranged as follows:
6.03 Power Supply Replacement
6.04 Replacement Power Supply Parts
6.05 Options and Accessories
6.06 External Replacement Parts
6.07 Replacement Parts for SL60 Hand Torch
6.08 Replacement Parts for SL60QD Hand Torch
6.09 Torch Consumable Parts (SL60™)
NOTE!
Parts listed without item numbers are not shown, but may be ordered by the catalog number shown.
B. Returns
If a product must be returned for service, contact your distributor. Materials returned without proper
authorization will not be accepted.
6.02 Ordering Information
Order replacement parts by catalog number and complete description of the part or assembly, as listed
in the parts list for each type item. Also include the model and serial number of the power supply.
Address all inquiries to your authorized distributor.
6.03 Power Supply System Replacement
The following items are included with the replacement power supply: work cable & clamp, input power
cable, input power cable adapters (2), gas pressure regulator / lter, SL60 Torch, spare parts kit, and
operating manual.
Qty Description Catalog #
1 CutMaster 40 Power Supply UL/CSA
120 -240 VAC, SINGLE Phase, 60Hz,
with input power cable and plug 1-4000-1
1 CutMaster 40Power Supply CE
240 VAC, SINGLE Phase, 60Hz,
with input power cable 1-4000-4
To Next Page
Loading...
Need help?
General
