Escea EK1250 - Cast Iron Instructions; Storage; Optimal Ember Generation; Cooking on the Fire

B
A
C ED F G H I
18
B
A
C ED F G H I
18
G1 Cast Iron Instructions
All cast iron parts lock into the grill frames provided with the appliance. Ensure that they are securely
set prior to cooking.
The cast iron parts supplied are coated in a vitreous enamel. In the event of decay or chipping, the cast
iron can be seasoned by rubbing a thin layer of oil on the cast iron and heating the surface.
Seasoning will protect the surface from rusting and reduce the likelihood of food sticking to the
surface.
G2 Storage
The EK range of fireplaces is designed to allow storage of cooking implements within the fire. To access
the storage area, lift the pivot drawer as shown in the diagram below.
G3 Optimal Ember Generation
The most ecient way to cook on a wood fire is over a consistent bed of embers. To achieve this, an
ember generation box has been provided. To begin, ax the ember generator to any of the racking sets
on the back of the fireplace and follow the instructions below.
Continue to load the ember generator with wood. Use the fire poker provided to get embers to fall
through the grate on the bottom of the ember generator.
G4 Cooking on the Fire
Begin by positioning the desired number of cooking plates at the desired height in the fire. For a