21 Changi South Street 1 Singapore 486777 Phone: +65 65420833 Fax: +65 65426920
E-mail: ductless@escoglobal.com Website:
www.escoglobal.com/ductless
USER SECTION
Chapter 2 – UNPACKING YOUR CABINET
5. Removing the packaging material
a) The cabinet is packed unassembled protected by styrofoam
b) Remove the styrofoam to unload different sections of the cabinet
c) If you find any damage during this stage of unpacking please refer to freight claim information
on page 6.
6. Install the cabinet on the existing work surface
Esco is committed to protecting the environment. Please re-
use the pallet as far as possible and/or
dispose off the packaging material and box in an environmentally re
sponsible manner. Please hammer
any exposed nail/sharp projection on the box’s surface prior to disposal.
For the cabinet to deliver optimal performance, it is very important to place it at the most
suitable location. There are a lot of factors that determine the location best suited for the
cabinet. Please refer to the next chapter for guidelines.
While installing the cabinet onto an existing work surface, ensure that the structure can safely
support the combined weight of the cabinet and any related equipment. Some modifications to
the work surface may be necessary.
The work surface should be smooth, nonporous and resistant to those disinfectants and
chemicals, to which the cabinet is regularly exposed.
To Next Page
Loading...
Need help?
General