Settings & Preferences
Press and hold the MRK and SEN buttons to access Preferences. To exit Preferences, simply wait a few
seconds without pressing a button. The unit will display Completed to conrm your selections.
8
Press MRK to go from Press VOLUME + or – to change
one category to the next your setting within a category
User Mode
Advanced* Access and customize all Settings and Preferences
Novice Access and customize units and display color, (all other
Settings are set to factory defaults)
NOTE: Switch back to advance mode to view all Preferences.
Pilot Scan Bar* Scanning Bar with Full Word.
Full Word Full Word: Auto, Auto NoX, AutoLoK or Highway
Display Color
Blue*/Green/Red/Amber Set color to match your vehicle’s dash display
Speed Display
On* Displays current speed
O Displays battery voltage
.
Cruise Alert
20 mph* Oers double beep alert tones below specied speed
O / 20-160 mph
Over Speed 70 mph* Reminds you when you exceed a specied speed
O / 20-160 mph
Meter Mode Standard* Single band with bar graph of signal strength
Spec Single band with numeric frequency
Expert Multiple bands with bar graph of signal strengths
Simple Simple messages replace bands:
Caution (if traveling below cruise alert limit)
Slow Down (if traveling above cruise alert limit)
Tones
Standard* Standard ESCORT alert tones
Mild Mild doorbell chime alert tones
AutoMute
AutoMute Low / Automatically reduces audio to preferred volume
Med* / High / O during alert
AutoLearn
On* / O Automatically stores and locks out false alarms
Units
English* / Metric Units for distance and speed
Language
English* / Espanol Language for voice and text
Voice
On* / O Voice announcements
GPS Filter
On* / O Enables GPS-powered features
To Next Page
Loading...
