AutoPower O Power turns on or o depending on your vehicle’s ignition
type (constant power or switched)
1 Hour Powers o automatically after 1 hour
2 Hours Powers o automatically after 2 hours
4 Hours* Powers o automatically after 4 hours
8 Hours Powers o automatically after 8 hours
NOTE: If AutoPower is on, to save screen life the display screen goes blank after 30 minutes
without moving. Display screen will turn on automatically after you reach 10MPH.
Band Enables Default* Default Settings for North America
Modied Customize the bands you want to monitor
Press SEN to go from one Press VOLUME + or – to change
band category to the next your setting within a category
X Band
On* / O
K Band On* / O
Ka Band On* / O Freq: 33.400-36.000 Ghz
NOTE: When Ka Band is o, you can select separate segments of the band to turn on and o.
KaN1 On* / O Freq: 33.660-33.900 Ghz
KaN2
On* / O Freq: 34.200-34.400 Ghz
KaN3
On* / O Freq: 34.600-34.800 Ghz
KaN4
On* / O Freq: 35.400-35.600 Ghz
Ka-POP
On / O*
Laser
On* / O
TSR On* / O Automatically rejects trac ow sensors-monitoring false alarms
RDR
On* / O Radar Detector Rejection
Marker Enables
Default* Other, Red Light Camera, Red and Speed Camera, and Speed Trap
Modied Customize the types of locations you want to mark for future reference
Press SEN to go from one Press VOLUME + or – to change
marker category to the next your setting within a category
Other
On* /O Other location
Redlight
On* / O Red light camera
Red & Speed
On* / O Red light & speed camera
Speed Cam
On* / O Speed camera
Speed Trp
On* / O Speed trap
Air Patrol
On / O* Known aircraft patroled areas
NOTE: User cannot mark an air patrol location.
Clear Locations Marked Clear all user Marked locations. Press SEN button to conrm
Lockouts Clear all lockouts. Press SEN button to conrm
Defender Clear all DEFENDER data. Press SEN button to conrm
Format Clear DEFENDER database, all markers, and all lockouts
Press SEN button to conrm
*Default Setting
NOTE: AutoPower only works with
constant power ignition.
9
To Next Page
Loading...
