Programming Menu
Press SEN to go from Press VOLUME + or – to change
one category to the next your setting within a category
Ka Band On / Off* Covers frequency range: 33.400 – 36.000 GHz
NOTE: When Ka Band is off, Ka Narrow bands are available selections
Ka Narrow 1 On / Off* Covers frequency range: 33.600 – 33.700 GHz
Ka Narrow 2 On* / Off Covers frequency range: 33.700 – 33.900 GHz
Ka Narrow 3 On / Off* Covers frequency range: 33.900 – 34.200 GHz
Ka Narrow 4 On / Off* Covers frequency range: 34.200 – 34.600 GHz
Ka Narrow 5 On* / Off Covers frequency range: 34.600 – 34.800 GHz
Ka Narrow 6 On / Off* Covers frequency range: 34.800 – 35.160 GHz
Ka Narrow 7 On / Off* Covers frequency range: 35.160 – 35.400 GHz
Ka Narrow 8 On* / Off Covers frequency range: 35.400 – 35.600 GHz
Ka Narrow 9 On / Off* Covers frequency range: 35.600 – 35.840 GHz
Ka Narrow 10 On / Off* Covers frequency range: 35.840 – 36.000 GHz
Laser On* / Off Laser detection
TSR On* / Off Traffic Sensor Rejection (TSR) filtering
Exit Exit Band Enables menu
K Notch On / Off* Reduces sensitivity of K band frequency range:
24.190 – 24.210 GHz
NOTE: K Notch is effective at reducing alerts to certain vehicle collision
avoidance systems
Shifters Receive / Shift* / Shift4 / Shifter mode. Receive = receive-only
Shift6 / Shift8 / Shift10 / Off Shift4/6/8/10 puts shifters in receive-only mode after 4/6/8/10
seconds from receiving an alert
NOTE: only available when optional ZR5 or ZW5 shifters are connected
Marker Enable Default* Default Marker Enables
Modified Marker Enables have been modified from their default settings
12
To Next Page
Loading...