What is a Channel Programmer?...
An explanaon for householders
On some programmers you must also set whether you want the
Central Heang and Hot Water to run connuously, run under the
chosen ‘On’ and ‘Off’ heang periods, or be permanently off. The
me on the programmer must be correct. Some types have to be
adjusted in Spring and Autumn upon the changes between Winter
and Summer me.
You may be able to temporarily adjust the heang programme, for
example, ‘Override’,‘Advance’ or ‘Boost’. These are explained in the
manufacturer’s instrucons. The Central Heang will not work if the
room thermostat has switched the Central Heang off. And, if you
have a Hot Water cylinder, the water heang will not work if the
cylinder thermostat detects that the Central Hot Water has reached
the correct temperature.
1
Programmers allow you to set ‘On’ and ‘Off’ me
periods. Some models switch the Central Heang and
domesc Hot Water on and off at the same me, while
others allow the domesc Hot Water and Central Heang to come
on and go off at different mes. Set the ‘On’ and ‘Off’ me periods
to suit your own lifestyle.
To Next Page
Loading...
Need help?
General
