234 ESI Operation Manual
4. Select one of the effects using the data entry control or INC/DEC
keys.
5. Press the Right Cursor key. The Effect Parameters screen appears.
PRESET EFFECT B
Feedback: 48
LFO Rate: 24
Delay Time: ---
6. Move the Cursor down to the third line and adjust the LFO Rate
as desired.
7. Press the Preset Definition key to return to the main menu.
Delay Time
Flanging, chorus and echoes are all based on a delay line where the
signal is delayed by some time period and mixed back together with it's
un-delayed signal. This parameter varies the length of the delay or “how
much time” passes before you hear the delayed signal. On some effects,
this parameter is not adjustable, indicated by a dash in the field.
1. Press the Preset Definition key. The LED illuminates and the
Preset Definition menu appears.
2. Select Effects (9). The main Effect screen appears.
3. Select Preset Effect B (1). The following screen appears.
PRESET EFFECT B
Effect:
Delay Stereo 2
4. Select one of the effects using the Data Entry Control or INC/
DEC keys.
5. Press the Right Cursor key. The Effect Parameters screen appears.
PRESET EFFECT B
Feedback: 32
LFO Rate: 0
Delay Time: 400ms
6. Move the Cursor down to the third line and adjust the Delay
Time as desired.
7. Press the Preset Definition key to return to the main menu.
To Next Page
Loading...
