ESI Julia - Specifications

ESI Juli@
44
8. Specifications
<Analog Audio>
1. Analog Inputs
* Unbalanced Part
1) Connector Type : Gold-plated RCA female (line in 1 and 2)
2) Peak level : 0dBFS @ +6dBV (-10dBV nominal)
3) Impedance : 10k ohms minimum
* Balanced Part
1) Connector Type : 1/4" female TRS-type,
balanced or unbalanced(line in 1 and 2)
2) Peak level : 0dBFS @ +20dBu (+4dBu nominal)
3) Impedance : 10k ohms minimum
2. Analog Ouputs
* Unbalanced Part
1) Connector Type : Gold-plated RCA female (line out 1 and 2)
2) Peak level : +6dBV @ 0dBFS (-10dBV nominal)
3) Impedance : 100 ohms minimum
4) Attenuation Control : -63dB ~ 0dB (0.5dB step size)
* Balanced Part
1) Connector Type: 1/4" female TRS-type, balanced or unbalanced(line out 1
and 2)
2) Peak level : +20dBu @ 0dBFS (+4dBu nominal)
3) Impedance : 100 ohms minimum
4) Attenuation Control : -63dB ~ 0dB (0.5dB step size)
3. Monitor
1) Monitor Control: Analog input, Digital input, Digital output
2) Attenuation Control : -63dB ~ 0dB (0.5dB step size)
<Digital Audio>
4. Sample rate : 44.1,48,88.2,96,176.4,192KHz
5. A/D Converter (AK5385A)
1) Signal to Noise Ratio : 114dB (A-weighted) @ fs=48kHz
2) Dynamic Range : 114dB (-60dBFS with A-weighted) @ fs=48kHz
3) Inter channel Isolation : -120dB
4) Resolution : 24-Bit
6. D/A Converter (AK4358)
1) Signal to Noise Ratio: 112dB (A-weighted) @ fs=44.1kHz
2) Dynamic Range (S/N) : 112dB (60dBFS with A-weighted)@ fs=44.1kHz
3) THD+N : -94dB @ fs=44.1kHz
4) Inter channel Isolation : -100dB
5) Attenuation Control : -63dB ~ +0dB (0.5dB Step Size)
6) Resolution : 24-Bit
7. Digital Input
1) Connector Type : RCA(provided via breakout cable)
2) Format : IEC-60958 Consumer(S/PDIF coaxial)
3) Sampling Rate : 44.1,48,88.2,96,176.4,192KHz
4) Resolution : 24-Bit
8. Digital Output
1)Connector Type : RCA(provided via breakout cable), Optical(on
board)
2) Format : IEC-60958 Consumer(S/PDIF coaxial)
3) Sampling Rate : 44.1,48,88.2,96,176.4,192KHz(176.4,192kHz only coaxial)
4) Resolution : 24-Bit
<MIDI>
9. MIDI I/O
1) 1-in, 1-out; 16 MIDI channels in and out
Connector Type : Standard MIDI 5-pin DIN (provided via breakout cable)