14
Main unit parts and functions
A POWER button
Press to turn the unit on and off.
When the unit is on, the ring around the button lights.
When the unit is off, it is unlit.
When not using the unit, turn it off.
B CLOCK indicator
This shows the clock synchronization status.
This indicator blinks during clock synchronization and lights
when synchronization completes.
C MODE button
When stopped, press this button to change the input source.
When set to external input, the unit can be used as a D/A converter
(page21).
Press and hold to enter setting mode (page24).
D Remote control signal receiver
This receives signals from the remote control. When using the
remote control, point the end of it toward this receiver panel
(page12).
E Disc tray
Load a disc for playback here (page16).
F Display
This shows the playback time, the number of tracks and other
information (page20).
G Tray open/close (-) button
Press to open and close the disc tray.
H Stop (8) button
Press to stop playback (page17).
When stopped, press and hold to change the playback area of a
Super Audio CD (page17).
Press when in setting mode to complete changing settings and
show the ordinary display (page24).
I Play (7) button
Press to start disc playback (page16).
During playback, the indicator next to this button lights.
J Pause (9) button
Press to pause playback (page17).
When paused, the indicator next to the play button blinks.
K Skip (.//) buttons
Use to skip to the previous or next track.
Press and hold during playback to search backward/forward.
Repeatedly press and hold to change the backward/forward
search speed (page18).
Use to change parameters when in setting mode (page24).