5
BASIC OPERATIONS
CONNECTION TO A MONITOR
Use either HDMI or VGA output to connect to a monitor and select the correct input
channel on the monitor.
POWER ON
Plug one lead from the 5-way power supply into the 12VDC power supply input
marked on the DVR. Turn on the DVR at the mains power point. The Power supply
indicator light will illuminate on the DVR’s front panel followed by several short
bleeps.
POWER OFF
Select Logout from the Shortcut menu and turn off the DVR at the mains power
source.
N.B Auto resume after power failure. If the DVR is shut down abnormally, the DVR
will automatically backup video and resume previous working status after the
power is restored.
MOUSE CONTROLLER CONNECTION
In order to prevent un-authorised tampering majority of DVR functions of are
controlled via the mouse controller.
To Next Page
Loading...
