The eSSL F18 is an innovative biometric fingerprint reader designed for access control applications, offering unparalleled performance through its advanced algorithm for reliability, precision, and excellent matching speed. This device integrates a commercial-based fingerprint matching algorithm with a high-performance, high-image quality infrared detection fingerprint sensor. The F18 provides extensive flexibility, allowing it to be installed standalone or with any third-party access control panels that support standard Wiegand signals. All operations can be performed on its TFT-LCD color screen. The fingerprint image is displayed on the screen, guiding the user to place their finger in the proper position and increasing recognition rates. It supports TCP/IP and RS485 for network communication, and its auto-discovery tool simplifies network parameter settings and modifications.
Function Description:
The F18 primarily functions as a biometric access control device, using fingerprints, passwords, or cards for user verification. It supports various operational modes, including 1:1 matching (User ID + fingerprint) and 1:N matching (fingerprint only). The device can store user information, attendance records, and system settings. It also includes features for managing users, access control options, communication settings, system parameters, data management, firmware upgrades, display settings, time management, and auto-testing of device components.
Important Technical Specifications:
- Fingerprint Capacity: Supports a specified number of fingerprint templates (e.g., 2500 in the SysInfo display).
- Record Capacity: Can store a large number of attendance records (e.g., 100,000 in the SysInfo display).
- Communication Interfaces:
- Ethernet: Supports TCP/IP for network communication. Default IP address is 192.168.1.201, with a subnet mask of 255.255.255.0 and a gateway address of 0.0.0.0.
- RS232: Serial port for communication. Baud rates include 9600, 19200, 38400, 57600, and 115200.
- RS485: Serial port for communication. Baud rates include 9600, 19200, 38400, 57600, and 115200.
- USB: Supports USB Host for data exchange via U disk and USB Client for PC connection.
- Display: TFT-LCD color screen.
- Verification Methods: Fingerprint, password, ID card, Mifare card.
- Wiegand: Supports Wiegand 26 with site code and user ID or card number. Input and output configurations are available.
- Time Format: Supports 12H or 24H display.
- Clock Mode: Two clock modes (common, matrix, magic) are available for display.
- Picture Cycle Interval: Effective value is 3-999 seconds.
- Clock Display Delay: Effective value is 0-999 seconds.
- Image Resolution: 320x240 pixels for propaganda pictures.
- Propaganda Pictures Count: Maximum 10 pictures.
- Card Support: ID/EM, MIFARE cards (125KHz and 13.56MHz respectively).
- Standard Enrollment Code: Five digits (1-65534).
- Master-Slave Functionality: Supports master-slave setup for synchronized enrollment and attendance records across multiple devices.
Usage Features:
- User Enrollment: Step-by-step process for enrolling fingerprints, passwords, and cards. Proper finger placement is crucial for optimal recognition.
- User Management: Allows adding, editing, deleting, and searching users. User information includes ID, name, fingerprint, password, and card details. Privilege settings can be configured for each user.
- Access Control Options:
- Time Zone Setting: Defines 50 time zones, each with 7 effective time sections within 24 hours.
- Holidays Setting: Special access control time may be needed during holidays. Up to 100 holidays can be set.
- Group Time Zone Setting: Manages employees in groups, with each group having three time zones.
- Unlock Combination Setting: Allows setting up multi-verification combinations (up to 5 groups).
- Access Control Parameters: Configures door lock time, door sensor delay, alarm mode, alarm count, close time zone, valid holidays, and anti-passback settings.
- Duress Alarm Parameters: Configures duress alarm settings for 1:1, 1:N, and Pwd verification.
- Anti-Passback Setting: Prevents illegal entry/exit by requiring users to match records for IN/OUT. Supports IN, OUT, IN-Out, and None anti-passback modes.
- Communication Settings: Configures network (IP address, subnet mask, gateway, net speed), serial port (baud rate, device number), security (device ID, password), and Wiegand parameters.
- System Options: Configures system parameters such as matching threshold, time format, date format, key beep, voice, algorithm version, recheck minimum, and log alert.
- Data Management: Allows deleting attendance records, enrolled employees, fingerprint data, and all data. Also supports clearing purview and deleting pictures.
- Firmware Upgrade: Facilitated via USB Pen Drive.
- Display Setup: Configures 1:1 match retry times, password retry times, clock mode, picture delay, and clock delay.
- Interface Style: Customizable interface styles including Common, Matrix, and Magic.
- Date and Time Setting: Allows setting the current date and time.
- Daylight Saving Time (DLST): Supports DLST settings for countries with time changes.
- Query Record: Enables querying attendance records by start and end dates/times.
- System Information: Displays device records (users, administrators, passwords, fingerprints, records) and device information (serial number, version, vendor, manufacture date).
- Keyboard Types: Different keyboard types are available with various functions for navigation and input.
- USB Host/Client: USB Host for U disk data transfer, USB Client for PC connection.
- Propaganda Picture Upload: Allows uploading JPG pictures from a U disk to be displayed on the device.
- Web Server: The T&A system is based on a Web Server, enabling remote management of data, attendance, and device settings via a web browser.
Maintenance Features:
- Reset Options: Allows resetting all default settings, keyboard settings, bell settings, other parameters, and access settings.
- Scheduled Sleep: Configures the device to enter sleep mode during scheduled times to save power.
- External Bell: Enables an external bell for ringing.
- Lock Power-off: Prevents hostile power-off.
- Push Function: Selects whether to use the PUSH function.
- PenDrive Management: Allows downloading and uploading user information, fingerprint templates, and attendance data to/from a U disk.
- Auto Test: Provides tests for TFT display, audio, keyboard, sensor, and real-time clock to diagnose module faults.
- Firmware Upgrade: Facilitates updating the device firmware for improved performance and features.
- Data Backup/Restore: Data can be backed up to and restored from a U disk, ensuring data safety.
Need help?
General
To Next Page
