2. If a password is successfully changed, enter the password ID
of the to-be changed password to change the next password.
2.2 Configure Unlocking Duration
Note: Three-digit values are automatically verified. For values
with less than three digits, press # to enter the verification
process. Values greater than 254 are considered invalid.
2.3 Configure Authentication Mode
Note: 1. Details about the authentication mode are as follows:
1. The administrator
password is authenticated.
2. Press 4. (The indicator
turns green and makes a
long beep.)
3. Enter the unlocking
duration.
(range: 0 to 255)
4. The unlocking duration
is modified. (The indicator
turns green and makes a
long beep.)
5. Exit. (The device
automatically exits the
process when the operation
is completed.)
1. The administrator
password is authenticated.
2. Press 5. (The indicator
turns green and makes a
long beep.)
3. Enter the authentication
mode.
4. The authentication is
successful. (The indicator
turns green and makes a
long beep.)
5. Exit. (The device
automatically exits the
process when the operation
is completed.)
To Next Page
Loading...
