eSSL X7 - Administrator Password Be Forgotten; Add Users

Note: This Function can be used to open the door.
 Administrator Password Be Forgotten
If the administrator password is forgotten, you can press the
disassembly key three times to reset the password to the initial
administrator password 30 to 60 seconds after the device is
disassembled from the wall or door. (There is a long beep 30
seconds after the device is disassembled from the wall or door.)
1.2 Add Users
Register the fingerprint or card of a user or register cards in
batches.
 Add Users
Failed.
(The indicator turns red YES
and makes three beeps.)
1. The administrator
password is authenticated.
2. Press 1. (The indicator
turns green and makes a
long beep.)
3. Register fingerprints or
cards. (Press fingers three
times to get a fingerprint
or swipe the card once.)
4. Adding Users is
successful. (The indicator
turns green and makes a
long beep.)
5. Exit.
(Press * to exit.)