Operation Instructions
1. User Management
1.1 Administrator Operations
To ensure data security of the device , you can operate the
device only after the administrator password is authenticated.
Authenticator the Administrator Password
1. Press (*)
(The indicator is off and
makes a long beep)
2. Press (#)
(You can authenticate the
password)
Yes
Note: The initial administrator password is 1234. You are
advised to change the initial password at the beginning.
3. Enter the administrator
password.( The initial
password is 1234)
5.Exit
(Press * or do not operate the
device within 20 seconds)
4. The authentication is
successful.
(The indicator turns green)
To Next Page
Loading...
