eSSL X7 - Functions of the Device; User Management; Administrator Operations

Instructions
Recommended Procedure:
Step 1: Install the device and power on.
Step2: After the administrator password is authenticated and
changed, register user’s fingerprints, cards, or passwords.
Step3: Configure access control parameters, including
modifying eight passwords for opening the door and configuring
the unlocking duration, authentication mode, stealth mode, door
status mode, and alarm.
Functions of the Device
1. User Management
1.1 Administrator Operations
 Authenticator the Administrator Password
 Change Administrator Password
 Open the Door by the Administrator Password
 Administrator Password Be Forgotten
1.2 Add Users
 Add Users
 Register Cards in Batches
1.3 Authentication Users
1.4 Delete Users
 Delete a User
 Delete All Users