2. You must clear all the registered users before registering
cards in batches. IDs of to-be-registered cards must be
consecutive numbers.
1.3 Authentication Users
Authentication Users’ Fingerprints/Cards/Passwords
After the device is powered on, it enters the authentication state for users to unlock
the door.
Failed.
(The indicator turns red
and makes three beeps.)
Note: Press # after entering a password for authentication. The
door opens if entered password is identical with one of the eight
passwords for opening the door. The initial eight passwords for
opening the door are 8888. For how to change passwords for
opening the door. See 2.1 Change Eight Passwords for Opening
the Door.
1.4 Delete Users
Delete a user whose fingerprint or card is registered, or delete all
users.
1. The device is in the
authentication state.
2. Press fingerprints,
swipe cards, or enter
passwords. Press # after
entering a password.
3. The authentication is
successful.
To Next Page
Loading...