6 DUSTOMAT 21-67 H 09302-52-00
According to work equipment user directives 2009/104/EC and
TRGS 553, safety devices for prevention or removal of hazards must be
regularly maintained and regularly inspected by an expert for safe, flawless
operation.
In all emergencies, the device must be disconnected from the power supply
immediately. Turn the device off with the emergency switch and pull the
plug. If there is a fire, the fire department is to be alerted immediately, and
the fire must be contained by appropriate means. A suitable extinguishing
agent must be kept near the device before start-up and during operation.
2. Preventing mechanical hazards
All movable machine parts driven by electric motors must be covered by fixed,
securely fastened protective covers that can be removed only with tools.
An exception to this is the brush cleaning inside the filter. If there is a block, the
safety mechanism (miniature fuse) must be tripped. Because this mechanism is
tripped by only a slight deviation below normal cleaning power, there is no danger
of injury.
Residual risk:
If a covering that can only be unfastened with a tool is removed, there is risk
of injury if the machine is running!
3. Preventing electrical hazards
All electrical parts must be covered by fixed, securely fastened protective covers
that can be removed only with tools. The device complies with Protection Class I
according to EN 60 335.
Residual risk:
If a covering that can only be unfastened with a tool is removed, the risk of
an electric shock cannot be ruled out!
To Next Page
Loading...
