Estun E10 - Page 23

E10 Operation Manual V1.15
Description: When the function of searching for Y-axis reference point is available, the parameter
sets the value as a reference point.
PAN 62. Input level mode
Range: 0 - 1
Unit:
Default: 0
Description: level mode selection of input IN1, 0: always; 1: normally close.
PAN 63. Input level mode
Range: 0 - 1
Unit:
Default: 0
Description: level mode selection of input IN1, 0: always; 1: normally close.
PAN 64. Output level model
Range: 0 - 1
Unit:
Default value: 1
Description: level mode selection of output OUT1, 0: always; 1: normally close.
PAN 65. Output level model
Range: 0 - 1
Unit:
Default value: 1
Description: level mode selection of output OUT2, 0: normal open; 1: normal close.
PAN 66. Output level model
Range: 0 - 1
Unit:
Default value: 1
Description: level mode selection of output OUT3, 0: normal open; 1: normal close.
PAN 67. Output level model
Range: 0 - 1
Unit:
Default value: 1
Description: level mode selection of output OUT4, 0: normal open; 1: normal close.
PAN 68. Output functionality mode
Range: 0 - 4
Unit:
Default: 0
Description: function mode selection of output OUT1, 0: Y max limit; 1-3: Timing Relay 1-3; 4:
counting to output.
PAN 69. Output functionality mode
Range: 0 - 4
Unit:
Default: 0
Description: function mode selection of output OUT2, 0: Y max limit; 1-3: Timing Relay 1-3; 4:
counting to output.
PAN 70. Output functionality mode
Range: 0 - 4
Unit:
Default: 0
Description: function mode selection of output OUT3, 0: Y max limit; 1-3: Timing Relay 1-3; 4:
counting to output.
PAN 71. Output functionality mode
Range: 0 - 4
Unit:
Default: 0
Description: function mode selection of output OUT4, 0: Y max limit; 1-3: Timing Relay 1-3; 4:
counting to output.
PAN 72. Relay functionality mode
Range: 0 - 2
Page 22 of 28