37
Press the button „ “ on the device (only
VN630W) once briefly to start the voice con-
trol.
Press the button „
“ on the device (only
VN630D) once briefly to start the voice con-
trol.
On the screen, possible command examples
are shown. Besides the source selection you
can also target the title name of e.g. a song
on your USB stick.
When you speak no command, the voice
control function will be disabled after about
10 seconds (timeout).
Say „Help“ to view a list of possible voice
commands.
Under „Voice Volume“ you can adjust the
volume of the speech output (0-10).
The unit will inform you after the activation of
the voice control about the connected devic-
es such as USB sticks or inserted SD cards.
If „Play Bluetooth Status Voice“ is activated,
an audible confirmation of the Bluetooth™
connection is issued whenever you connect
or disconnect a paired Bluetooth™ device.
BASIC FUNCTIONS
To Next Page
Loading...
