Why is my connected device not working with ESX Car Receiver?
M
michellebrownSep 12, 2025
If a connected device is not working with your ESX Car Receiver, the device might not be properly connected, the connection cable could be defective, or the device may not be compatible. Check all connections and replace any damaged cables. If necessary, perform a software update or try another device.
T
Tammy KleinAug 23, 2025
What to do if the screen is black on my ESX VN630W?
I
ismithAug 23, 2025
If your ESX Car Receiver screen is black, try tapping the screen to see if the display is disabled. If that doesn't work, press the left knob on the device to exit standby mode.
T
Timothy MurphyAug 25, 2025
How to fix inaccurate touchscreen input on ESX VN630W Car Receiver?
J
Jason WilliamsAug 25, 2025
If the touchscreen function of your ESX Car Receiver is inaccurate or delayed, it could be due to improper calibration or the device processing a task. First, calibrate the touchscreen by going to Apps - Options - System. If the problem continues, wait until the current process is completed.
K
kwhiteAug 27, 2025
Why won't my ESX VN630W Car Receiver turn on?
C
Christopher GrantAug 27, 2025
If your ESX Car Receiver cannot be turned on (VN630D model only), it might be due to operator error or a defective fuse. To turn on the device with the ignition off, press and hold the power button for about 2 seconds. The device will automatically switch off after 30 minutes. If that doesn't work, replace the blown fuse with a new one of the same type and value.
A
Alexandra PopeAug 28, 2025
How to resolve distorted sound on ESX VN630W Car Receiver?
N
nguyensamuelAug 28, 2025
If the sound from your ESX Car Receiver is distorted, overdriven, or has strong noises, the equalizer settings or volume settings of each application might be unfavorable. Check the audio settings under Apps - Audio or Advanced, and correct the settings to improve the sound quality.
A
Austin GillAug 29, 2025
Why can't my ESX VN630W find my location?
A
Anne LloydAug 29, 2025
If the ESX Car Receiver isn't able to find your current location or the route guidance is disturbed, the GPS antenna might not be connected correctly, or you may be in an area with a weak GPS signal. Check the GPS antenna connection, and replace it if defective. If the connection is fine, continue driving until the GPS signal is available again.
D
Dwayne JimenezSep 18, 2025
Why won't my phone connect to ESX VN630W Car Receiver via Bluetooth?
P
Philip JensenSep 19, 2025
If there is no connection or pairing of the devices with your ESX Car Receiver, the phone's Bluetooth function might not be enabled, the phone might not be visible, the Bluetooth standard of the phone might not be compatible, or too many Bluetooth devices might be registered in the device. Enable Bluetooth function in the phone settings. Enable „visible“ in the phone settings. Use a compatible phone. Delete unused Bluetooth devices from the storage of the device.
S
Sherry ScottSep 12, 2025
Why can't my ESX VN630W find radio stations?
W
William HillSep 12, 2025
If no radio station was found with the automatic station search on your ESX Car Receiver, a program type might be selected under PTY that is not available in the current area, AF or TA might be activated, or the antenna system might be working improperly. Select „None“ under PTY to disable the search for a certain program type. Disable the AF and TA function and start the search again. Check the plug connection of the original antenna to the radio or check the car antenna system.
A
anthony29Sep 8, 2025
What causes disrupted playback on my ESX Car Receiver?
J
Jessica HoSep 8, 2025
If you're experiencing erroneous or disrupted playback on your ESX Car Receiver, it could be due to the disc not being loaded correctly, the disc being damaged, or the disc being incompatible. Insert the disc again with the print side up. If the problem persists, try another disc.
J
Jason CookSep 5, 2025
How to improve picture quality on ESX Car Receiver DVD playback?
J
John WilliamsSep 5, 2025
If the picture quality during playback on your ESX Car Receiver is insufficient, the brightness, contrast, and color saturation might be set too low. Check the DVD player settings and correct them.