How to fix E-Link connection issues on ESX VNC730 FI-DUCATO Car Receiver?
If you're experiencing E-Link connection issues with your ESX Car Receiver, the Android device might not be compatible. Try using another Android device.
How to fix distorted sound on ESX VNC730 FI-DUCATO?
If the sound from your ESX Car Receiver is distorted, overdriven, or noisy, the equalizer settings or volume settings for each application may be unfavorable. Check the audio settings under Apps - Audio or Advanced, and correct the settings to see if the sound improves.
What to do if my ESX VNC730 FI-DUCATO won't turn on?
If your ESX Car Receiver won't turn on, and the ignition is off, press and hold the power button for about 2 seconds. Note that the device automatically switches off after 30 minutes. If that doesn't work, the fuse or a fuse in the vehicle electronics may be defective. Replace the blown fuse with a new fuse of the same type and value.
How to fix inaccurate touchscreen input on ESX VNC730 FI-DUCATO?
If the touchscreen function of your ESX Car Receiver is inaccurate or delayed, the touch-screen might not be properly calibrated. Calibrate the touch screen under Apps - Option - System. Alternatively, the device may be processing something. Wait until the process is completed.
Why is my ESX VNC730 FI-DUCATO screen black?
If the screen on your ESX Car Receiver is black, the display may be disabled. Tap on the screen to activate it. Alternatively, the device might be in standby mode. Press the left knob on the device to exit standby mode.
Why is the camera showing when my ESX VNC730 FI-DUCATO Car Receiver is off?
The rear camera has priority for safety reasons and starts the transmission even when the ESX Car Receiver is turned off. The device will be operable again and can be started only after the reverse drive has finished.
Why is the picture quality bad during playback on my ESX Car Receiver?
If the picture quality is insufficient during playback on your ESX Car Receiver, the brightness, contrast, and color saturation might be set too low. Check the DVD player settings and adjust them.
Why does my ESX Car Receiver have erroneous playback?
If your ESX Car Receiver experiences erroneous or disrupted playback, the disc might not be loaded correctly. Insert the disc again with the print side up. The disc could be scratched, broken, or deformed. Insert another disc. Also, the disc might not be compatible with the device. Insert another disc.
Why can't I see anything on the map of my ESX Car Receiver?
If nothing is displayed on the map of your ESX Car Receiver, the display scale of the map may be set too large or too small. Change the ratio of the display scale until the map is properly displayed. A brief loss of the GPS signal can also cause this. Continue driving until the GPS signal is available again.
How to improve GPS signal on ESX VNC730 FI-DUCATO Car Receiver?
If your ESX Car Receiver can't find your current location or the route guidance is disturbed, the GPS antenna might not be connected properly. Check the GPS antenna connection or get a new one if it's defective. You may be in an area with a weak GPS signal, such as a tunnel or remote road. Continue driving until the GPS signal is available again.
General| Brand | ESX |
|---|---|
| Model | VNC730 FI-DUCATO |
| Category | Car Receiver |
| Language | English |
To Next Page
