eta Aron User Manual

EN - 55
EN
Scheduled cleaning setting
Warning
When setting the scheduled cleaning, make sure that the vacuum cleaner is in standby
mode.
1. Aim the remote control towards the vacuum cleaner and press the F4 button.
The value for setting the hour in the rst line of the display starts ashing.
2. You can now use the F3 buttons (up and down arrows) to set the scheduled cleaning
hour value. Use the F3 buttons (left and right arrows) to switch between setting the
hours and minutes.
3. Switch the setting for minutes (the minute value will ash) and set the minute value
of the scheduled cleaning (the minute setting is in 15-minute increments).
4. To conrm and save the set scheduled cleaning time, press the button F4. The set value
will be permanently lit on the display.
Note
To cancel the scheduled cleaning, set the "00:00". value on the display.
5.6 USING THE MOPING ATTACHMENT
1. Attach the G3 mop to the lower part of the moping
attachment correctly. Soak and wring the mop before use.

eta Aron Specifications

General

Brand	eta
Model	Aron
Category	Vacuum Cleaner
Language	English