ETC ColorSource - Introduction

ETC Quick Guide
ColorSource Relay and ColorSource Transmitter
Relay and Wireless DMX Transmitter Page 5 of 5 ETC
Specifications
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including any
interference that may cause undesired operation.
Contains: FCC ID: VU65792M
Contains: IC ID 7480A5792M
EU Declaration of Conformity
This product complies with the Essential requirements of the R&TTE Directive
of the European Union (1999/5/EC)
This product conforms to the following standards:
ETSI EN 300 328 V1.8.1 (2012-06), EN 301-489-1 V1.9.2 (2011-09), EN 301-
489-17 V2.2.1 (2012-09)
Note:
Only connect this equipment to branch protected
circuits of 20A or less.
input voltage: 90-250V; 47-63hz
environment: 0-40°C; 5-95%
humidity
switching current: 2 pole; 16A
max
mechanical endurance: 1,000,000
cycles
CE and FCC compliant
wired data output: DMX512A and
RDM
wireless latency: 7mS wireless band: 2.4GHz FHSS
wireless output power: up to
72mW ETSI broadcast power
electrical endurance:
100,000 @16A 250V Resistive
20,000 @ 20A 250V Resistive