ETC ColorSource CYC - User Manual

ETC Installation Guide
ColorSource
®
CYC v1.6
Corporate Headquarters  Middleton, Wisconsin, USA  Tel +608 831 4116
Service (Americas)  service@etcconnect.com
London, UK  Tel +44 (0)20 8896 1000  Service: (UK) service@etceurope.com
Rome, IT  Tel +39 (06) 32 111 683  Service: (UK) service@etceurope.com
Holzkirchen, DE  Tel +49 (80 24) 47 00-0  Service: (DE) techserv-hoki@etcconnect.com
Hong Kong  Tel +852 2799 1220  Service: (Asia) service@etcasia.com
Web: etcconnect.com  © 2017 Electronic Theatre Controls, Inc.  Product information and
specifications subject to change.  ETC intends this document to be provided in its entirety.
 US Patents 8,384,294 . 8,403,523 . 8,593,074 . 8,633,649 . 8,723,450 . 8,878,455 . 9,041,308
 EU Patents 2638781 . 6020110157302  All other patents pending.
7415M2100-1.6  Rev A  Released 2017-10
Overview
The ColorSource CYC is an affordable LED fixture that uses the RGBI-L (red,
green, blue, indigo, and lime) color system to provide a rich, bright light.
Safety
Read the entire manual before using this equipment.
Note:
Features described in this document require the latest
version of software. For information on updating fixture
software, see Updating the fixture software on page 9.
CAUTION:
• Risk of eye injury. Do not stare directly into the light.
• Do not operate in proximity to flammable materials.
WARNING:
Disconnect the fixture from power and DMX and allow
it to cool before performing any cleaning and
maintenance.

Summary

Overview

Safety

Electrical

Installation

Mounting

Details floor and pipe mounting options for the fixture.

Connectors

Describes powerCON and DMX512/RDM connectors for data and power.

Fixture Setup

Powering Up the Fixture

Steps to power on the fixture and wake the display for initial setup.

Adjusting Fixture Tilt

User Interface and Controls

Interface Overview

Setting DMX Address

Guides on setting the fixture's DMX start address via the interface or RDM.

DMX Control Modes

Changing DMX Control Mode

Presets and Sequences

Updating Fixture Software

Restoring Factory Defaults

Error Codes

Interpreting Error Codes

RDM Values Reference

ETC ColorSource CYC Specifications

General

Type	LED Cyc Light
Power Consumption	100 W
Light Source	24 Luxeon C LEDs
Beam Angle	50°
Control Protocol	DMX/RDM
Weight	5.4 kg