ETC Source Four Zoom User Manual

Copyright © Electronic 2008 Theatre Controls, Inc.
All Rights reserved.
Product information and specifications subject to change.
Part Number:
7060M1250-06.01 Rev C
Released: January 2010
Picking# 7060M1008-C
User Manual
Production Dates: September 2004 - Present
Zoom

ETC Source Four Zoom Specifications

General

Brand	ETC
Model	Source Four Zoom
Category	DJ Equipment
Language	English

Summary

Basic Assembly

Color Frame Holder

Details on securing color frames and accessories to prevent them from falling out.

Replacing the HPL Lamp

Step-by-step guide for safely replacing the HPL lamp in the fixture.

Fixture Information

Adjustments

Centering Lamp and Adjusting Field

How to align the lamp and adjust the light field for optimal performance.

Selecting Field Angle and Focusing Beam

Procedure for adjusting the beam's field angle and focus.

Pattern Projection

Information on using pattern holders for shaping the beam's projection.

Drop-In Iris Slot

Procedure for inserting an iris or motorized pattern device into the slot.

Rotating Barrel Assembly

Steps to rotate the barrel assembly for beam shaping adjustments.

Adjusting the C-Clamp

How to mount and position the fixture using the C-clamp.

Setting Fixture Height within Yoke (25°-50° Zoom)

Adjusting the fixture's height position within the yoke.

Setting Angle within Yoke (25°-50° Zoom)

Adjusting the fixture's angle position within the yoke.

Setting Balance Yoke (15°-30° Zoom)

Adjusting the balance yoke to reposition the fixture's center of gravity.

Setting Angle within Moveable Yoke (15°-30° Zoom)

Adjusting the fixture's angle using the moveable yoke.

Cleaning Lens and Reflector

Cleaning Glass Lens

Instructions for cleaning the fixture's glass lens with recommended materials.

Cleaning the Reflector

Steps for cleaning the fixture's reflector to maintain optical performance.