ColorSource User Manual 17
Specifications
ColorSource gelstring
Ten frames plus leader and trailer
Working length: 100 inches
Overall length: 110 inches
End to end speed: Three seconds
Frame width: Ten inches
Frame height: 7 1/16 inches
Leader: Five inches wide
Trailer: Five inches wide
ColorSource Power Supply
12 Color Changers per power supply
12 DMX512 channels per power supply
Starting DMX512 channel range: 1 - 501
DMX512 power loss bypass relay: Yes
Voltage: 115 VAC 50/60 Hz (standard wiring),
230 VAC ±10% 50/60 Hz (via internal wire changes)
other voltages, contact Wybron
Fuse: 2 amp slow blow at 115 VAC
1 amp slow blow at 230 VAC
1 line by 16 character alphanumeric display
12 XLR 6-pin female output connectors
DMX512 connectors input: 5-pin male XLR output
5-pin female XLR
DMX512 control cable
The DMX512 control signal cable from the lighting board to the
Power Supply is a 5-conductor cable terminated with a standard
XLR 5-pin connector. Wiring pinout is specified by the USITT
DMX512/ 1990 standard.
Control signal DMX512 pinout
Pin 1 = Common
Pin 2 = Data –
Pin 3 = Data +
Pin 4 = n/c
Pin 5 = n/c
ColorSource cable pinout
XLR Pin # Wire Color Function
1 Black Transformer center tap
2 Red Transformer secondary
3 Brown Transformer secondary
4 Green Signal ground
5 White Signal 0 - 10 Vdc
6 --------- No connection
Note: Maximum cable length of 100 feet to each ColorSource
Color Changer.
To Next Page
Loading...
