27 P-TS7 User Manual
Note:
If a message displays advising the firmware file is not recognized on the
selected removable media, check that the firmware file was saved to the root directory
of the selected media, and then try the reload process again.
4. Select the correct version of the *tfw file from the media directory. When the firmware
file is finished loading, the touchscreen will reboot.
Note:
When updating your P-TS7 firmware, you may also need to update your
Paradigm ACP firmware to remain compatible.
Reset to Defaults
Restores factory defaults to the settings on the Comms, Screen, Sound, and Network pages.
Cleaning the Display
Use a dry microfiber or lint-free cloth to clean any finger prints and oils from the display. Do not
use any chemical or water-base solution as they will damage the display.
To Next Page
Loading...
