40E700-21
TV Settings
TV Provider Setup
& Channel Auto Scan
To enter the Channel Menu:
• Press the MENU button
• Using the t u arrow buttons; scroll to highlight Channel
• Press the down q arrow buttons to highlight Air / Cable
Select Cable if you subscribe to a pay television service without a set top box.
• Press the t u arrow buttons to highlight Cable.
•
NOTE: Channel Auto Scan may take several minutes to complete.
Cable Mode
Air Mode
Select Air when TV is connected to an indoor / outdoor antenna.
• Press the t u arrow button to highlight Air.
•
NOTE: Channel Auto Scan may take several minutes to complete.
satellite set top box to one of the available inputs on the TV for viewing.
Next
Next
Total Found
Total Found
Channel List
Show/Hide
Channel Number
Channel Label
5-2
KSTP-SD
Next
Channel List
Show/Hide
Channel Number
Channel Label
5-2
KSTP-SD
Note: For Cable or Satellite users with a set-top box, there is no need to run Channel Auto Scan. Connect your cable
Yes
No
Yes
No
To make changes your TV provider or re-scan for available broadcast channels in your area, select the Channel Menu.
Press the q arrow button to highlight Auto Scan and press ENTER. Press the u arrow button to highlight YES
and press ENTER to begin Auto Scan.
Press the q arrow button to highlight Auto Scan and press ENTER. Press the u arrow button to highlight YES
and press ENTER to begin Auto Scan.
To Next Page
Loading...
