What to do if my ETEKCITY Scales display shows 'Err'?
If your ETEKCITY Scales display shows 'Err', it means the item you are weighing is too heavy. Remove the item from the scale to protect its weight sensors. Consider using a different scale that has a higher weight range.
What to do if my ETEKCITY Scales display shows “Lo”?
If the display of your ETEKCITY Scales shows “Lo”, it means the battery power is low. To resolve this, plug in the USB power cord to charge the scale.
Why is my ETEKCITY EKS-L221-SUS reading inaccurate?
An inaccurate reading from your ETEKCITY Scales can be caused by several factors: * The scale isn't placed on a level surface. Always ensure the scale is on a level surface. * External interference. Keep the scale away from dirt, dust, vibrations, wind, air currents, and electromagnetic interference. * Incorrect starting point. Make sure the screen displays '0.00' before measuring. Refer to the Zero / Tare Function instructions for more details.
Illustrates and labels the physical parts of the kitchen scale.
Explains symbols for battery, tare, milk, water, and hold status.
Details the weight value and unit display on the scale.
General| Units | oz / lb:oz / g / mL (water/milk) / fl’oz (water/milk) |
|---|---|
| Increments | 0.05 oz / 1 g |
| Auto-Off | 180 seconds |
| Battery | 300mAh Li-ion Battery |
| Input | 5.0V 500mA (USB Type-C Charging) |
Weight and Dimensions| Weight Capacity | 353 oz / 22 lb / 10 kg / 10000 mL |
|---|---|
| Dimensions | 9.1 x 6.7 x 1.1 in / 230 x 170 x 27 mm |
To Next Page
