ETERNITY SH300 - Specifications and Operation Theory; Physical Specification; Environment Requirements

51
9 Specifications and Operation Theory
9.1 Physical specification
All specifications are approximately, maybe changed at any moment without notice.
CAUTION: Do not put SH300 into the shock environment.
CAUTION: Do not lay the heavy on the top.
Size
400mm(H)×303mm(W)×250mm(D)
Weight
Approximately 15kg
Power cord
Rating voltage: 100 to 240VAC;
Capacity of current: 220 to 240VAC 10A;
Type: Three-core cable (Medical level)
Gas pipe
Compression resistance: 1MPa
Patient circuit
Single use
Face mask
Single use
Screen
10.4‟ TFT LCD, touch screen
9.2 Environment requirements
Temperature
Operation:
10℃～40℃
Storage:
-20℃～55℃
Relative humidity
Operation:
≤80%, non-condensing
Storage:
≤93%, non-condensing
Atmospheric Pressure
Operation:
70～106kPa
Storage:
50~ 106kPa
CAUTION: The device should be stored at the room that is drafty and no
corrosion gas exists.
CAUTION: When the storage conditions are beyond the requirements of
operational environment, and the storage state is transferred into
operation state, the product only can be used after being stored in
environment for over 8 hours.