EN 11
OPERATION
Programming the cooking end time
1. Select a cooking function and temperature.
2. Touch (several times) until the symbol on the display starts to flash.
▷ You will see the current time on the timer display.
3. Set the cooking end time by touching or .
▷ An audio signal will sound and the coooking end time will be displayed on the display.
The symbol will flash slowly.
▷ When the set cooking end time is reached, the oven will turn off, an audio signal will
sound and the symbol will flash quickly. 'End' appears in the display.
4. Touch the stop key to stop the audio signal and turn off 'End' and the symbol.
▷ The oven will switch on again.
5. Set the controls to the position to turn off the oven.
You can change the cooking end time at any time by touching (several times) until
the symbol starts to flash quickly. Now touch or to change the time.
Programming the cooking time and the cooking end time
1. Select a cooking function and temperature.
2. Touch (several times) until the symbol on the display starts flashing.
▷ The indication ‘00:00’ will appear on the display.
3. Set the cooking time by touching or .
▷ An audio signal will sound, the remaining cooking time will appear on the display and
the symbol will flash slowly.
4. Touch (several times) until the symbol on the display starts to flash.
▷ You will see the expected cooking end time on the timer display.
5. Set the cooking end time by touching or .
▷ An audio signal will sound and the current time will be shown on the display.
▷ The oven will not be in operation, the and symbols lit up. The oven is now
programmed.
▷ When it is time to start cooking, the oven will turn on and will operate for the
programmed cooking time. While cooking, the remaining cooking time will be displayed
and the symbol will flash slowly.
▷ Once the cooking time has ended, the oven will turn off, an audio signal will sound and
the symbol will flash quickly. 'End' appears in the display.
To Next Page
Loading...
