EasyManua.ls Logo

ETNA CM941 - Oven door removal and refitting

ETNA CM941
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 22
Removing the oven door
Keep your fingers away from the oven door hinges.
The springs of the hinges are under high tension and can cause injuries.
Make sure the hinges are always properly locked.
Removing the oven door
1. Open the oven door fully.
2. Block the hinge by turning the latches to the front.
If the latches are hard to turn, use a flat tool to turn them.
3. Close the door to the lock mode position.
4. Hold the door with both hands holding on to both sides, lift up and pull out the oven door
until the hinges are fully detached.
2
3
4
5. To assemble the door, carry out the steps in the reverse order.
Attention
Make sure the door is inserted fully before turning the latches. If not, it can become
blocked when trying to close it.
MAINTENANCE

Table of Contents

Related product manuals