EN 28
'SHO' is shown in the display.
• The appliance is in 'showroom mode' (demonstration function) and does not heat up.
Briefly touch key and key simultaneously to cancel this function; you will hear two
audio signals.
Repairs should only be performed by a qualified service technician. If maintenance is
required, take the plug out of the socket and contact the Etna customer service.
Have the following information at hand when you call:
• The model number and serial number. This information is on the oven identification plate
which is on one side of the opened door.
• Warranty details.
• A clear description of the problem.
Choose a clean, dry place if you have to store the oven temporarily, as dust and
moisture can damage the appliance.
TROUBLESHOOTING
To Next Page
Loading...
