8
2.3 Optional and extra equipment
The table below shows the optional and extra equipment that can be added to the G6 charging
station:
Optional / Extra equipment
Sockets equipped with LED lights
LED lights allow the station to signal each
charging spot availability (available, occupied,
in fault)
Sockets equipped with extra lid locking
mechanism
The locking mechanism locks the lid of the
station which cannot be opened without prior
user identification
GPRS router with network switch
GPRS router can be used for communication
for several chargers on the same location
(required for control centre connection when
local connection via Ethernet is not possible).
Network switch can be used to connect
several stations on the same location with
one router.
Safety arches (Protection railing)
Protects the station from vehicle collisions
Different graphical user interface languages
Based on user identification, the station can
automatically adjust the language of the user
interface
Visual customisation of the station
Custom labels with client’s design, logotypes
or promotions
Connection of supply wires with greater
diameter (> 35 mm
2
)
Special connection terminals are built into the
station – can be used to connect several
stations in a row
DSM (Demand Side Management)
functionalities
Enables management of charging current
based on settings in the control centre for
management of charging infrastructure
Extra metallic plate for demo set-up
Can be used for temporary installation
To Next Page
Loading...
