15 | 26
Etrel Inch | User Manual
|
Figure 19: Insert the default IP into the browser to connect to web interface
Ping charging station from computer in same
network
Windows
To determine if your computer is in the same network as charging
station ping the station using the CMD command ping with the IP of
the station. You can change computer network in the network
settings.
To ping the station, connect to Command Prompt by searching for it
in windows search functionality.
Figure 20: Search for CMD using windows search functionality
Figure 21: Open Command Prompt
In the Command Prompt write ping and IP address you would like to
ping (eg. ping 192.168.1.190).
To Next Page
Loading...
